This replacement PSU is smaller than the original DPS-220UB
and comes with a special
NOT compatible with All-In-One computers.
-Our PSU is smaller than the
original (40x80x150mm) but it comes with a special metal bracket adaptor to match the
special cut out at the rear of the chassis.
-Size of the original PSU: 52x90x200mm
-Our PSU comes with 2 flat head screws
and 3 PSU screws to fit it in your PC as illustrated bellow.
Please mount the adaptor on the PSU BEFORE installing
the PSU in the chassis
-Some PSU with the same model number may have a
different size. If your original PSU measures 52x90x200mm, please use the
metal adaptor bracket supplied. If your original PSU measures 40x80x150mm,
please do not use the metal adaptor bracket supplied.
-Some PSU have a non standard special P3 connector for
the HDD back plate.
This 8pin flat connector (with 2x Yellow 12Volt, 2x
Red 5Volt & 4 Black wires) is not supplied with our PSU.
You can cut it off your old PSU and DIY reconnect it
to our PSU. Please ask for a free "Molex Splitter" when you order so you can
attach your special 8pin connector without modifying the new PSU and without
voiding its warranty. The Molex Splitter has all the correct wires. Please
ask if you require assistance for this DIY job.