-These PCI-Express extenders are essential for standard computer building as well as for intensive gaming and Litecoin, Bitcoin, Dogecoin mining rigs.
    -These High Quality Powered Riser cards are powered via a double wired Molex connector. This helps reduce the power usage from the motherboard preventing GPU and Motherboard damage when using multiple high spec GPUs.
    -The smoothing solid capacitor also increases GPU stability by regulation voltage.
    -The gold plated contacts provide a better conductivity and a longer product life.

    Available products:
     
    PCI-E 1x to 1x Ribbon Riser Card:
    This flexible riser card allows the connection of a PCI-E 1x card to a PCI-E 1x slot on the motherboard.
    Total length: 20cm (8inches). 
     
    PCI-E 1x to 16x HQ Powered Ribbon Riser Card:
    This powered flexible riser card allows the connection of a PCI-E 16x card to any PCI-E slot on the motherboard (1x, 4x, 8x or 16x).
    Total length: 20cm (8inches).
    Can be connected to a PSU Molex connector if more power is required.
     
    PCI-E 16x to 16x HQ Powered Ribbon Riser Card:
    This powered flexible riser card allows the connection of a PCI-E 16x card to a PCI-E 16x slot on the motherboard.
    Total length: 20cm (8inches).
    Can be connected to a PSU Molex connector if more power is required.
     
    PCI-E 1x to 16x Powered USB Riser Card. With Sata connector & Solid capacitor:
    USB cable length: 30cm (12inches) or 50cm (19inches)
    USB3 allows fast data transfer.
    This must-have item is ideal:
    • to make use of any type of PCI-E motherboard slots (The small 1x connector can be plugged into any PCI-E slot (1x, 4x, 8x or 16x).
    • when the card is placed far away from the motherboard,
    • to increase air flow (The USB cable does not obstruct the air flow as much as a ribbon riser card does).
    • Powered from a SATA PSU connector.

      More Info
      Measurements HxWxD Cable length may vary slightly without prior notice.
      Item Condition Brand new
      Remarks A PCI-Express riser card is only a serial point-to-point connection between the motherboard and the card. Compared to a small 1x riser card, a larger 16x riser card has additional communication lanes in parallel allowing higher speed. Conveniently, any size of PCI-Express card (1x, 4x, 8x, x6x) can be plugged in any kind of PCI Express motherboard slot. A small card 1x can be plugged in a 1x, 4x, 8x and 16x motherboard slot. Obviously, the bandwidth available will only be 1x. A large 16x card can also be plugged in a smaller slot (8x, 4x, or 1x) providing the slot has an open end to allow the card to be pushed all the way down. Again, the bandwidth available will be limited by the number of lanes of the slot. Note that sometimes a PCI-E slot operates with fewer data lanes than it is supposed to. For example, a 16x slot may have a data connection of only 8x, in which case a 16x card plugged in will only have an 8x bandwidth available. Have a look inside the slot to see how many contacts it actually has.

      Write a review

      Note: HTML is not translated!
          Bad           Good

      PCI-E Riser Cards

      PCI-Express HQ Powered Ribbon Flexible Riser Card / Converter / Adaptor / Extender 1x, 4x, 8x, 16x to 16x.

        VAT deducted for EU businesses & World customers.


      • Brand: Kate & McKenzie
      • Product Code: PCI-E Riser Cards
      • Availability: In Stock
      • £5.40

      • Ex Tax: £4.50

      • 10 or more £4.80

      Available Options